5 Tips To Choose The Best Led Stadium Lights  

 5 Tips To Choose The Best Led Stadium Lights

 

Nowadays, the popularity of LED stadium lights is on the rise. These days, almost all types of sporting tournaments require the use of these lights. In fact, they are installed lighting uniformity

in stadiums all over the world. These lights are eco-friendly and can support a lot of other applications as well. In this article, we are going to share a few tips that can help you opt for the best LED stadium lights. Read on.

Opt for Superior Chips

If you opt for high-quality units, you can choose from a lot of color temperatures, brightness, and luminous efficacy. There are a lot of brands out there that make LEDs using the state of the art technologies, such as COB and SMD.

Actually, these chips feature a much lower malfunction rate. So, what you should do is go for LED lights that are installed on high-quality chips. These units can stand the test of time.

Consider the Luminous Efficacy

As far as the performance of LEDs is concerned, luminous efficacy is one of the most important factors to consider. Actually, luminous efficacy is figured out based on the lumens produced for the electricity consumed.

Also, luminous efficacy represents how efficiently the light is being produced by the unit. Generally, it’s measured in lumens. The advancement in LED technology has resulted in LEDs that can produce 100 lumens per watt. However, if you opt for a higher quality unit, you can get higher luminous efficacy.

Consider the Beam Angle

Generally, the angle of the beam decides the way the light is distributed. If there is high light uniformity and a wider beam angle, you can’t achieve higher brightness. On the other hand, If there is a narrow-angle of the beam, you will enjoy a lower uniformity of light.

In this case, the light is bright and you can see a lot of spots on the ground. Make sure you opt for illuminants that feature the right beam angles in order to balance the light and brightness. Most operators hire engineers to perform a photometric analysis to chose lights that feature the right beam angles.

The Units should be Water-Resistant

 

 

 

Leave a Reply

Your email address will not be published.